2021 International Building Code – IBC-2021
The 2021 International Building Code® (IBC) provides comprehensive regulations for commercial and multifamily buildings, excluding detached one- and two-family dwellings and townhouses not more than three stories. Developed by the International Code Council (ICC), this model code supports safe, accessible, and sustainable construction through coordinated design and enforcement standards.
Highlights:
- Classifies puzzle/escape rooms as special amusement areas with new egress rules (Section 411)
- Allows separate building treatment for control areas separated by fire walls
- Requires enhanced classroom acoustics in small Group E occupancies per ICC A117.1
- Simplifies requirements for Metal Composite Materials (MCMs); removes sprinkler trade-offs
- Introduces clear guidelines for using shipping containers as buildings
- Adds sprinkler mandates for Group S-2 parking garages over 48,000 sq ft
- Adopts 2017 edition of ICC A117.1 for accessibility standards
- Mandates minimum-height parapets on aggregate-surfaced roofs for safety
- Classifies large assembly buildings (2,500+ occupants) as Risk Category III
- Aligns snow load maps and rain load rules with ASCE 7-16
- Requires special inspection of mass timber anchorage and connections
- Adds inspection requirements for fire-resistant systems in large Group R areas
- Introduces frost protection for egress doors at foundation level
- References ACI 117 and ITG 7 for concrete construction tolerances
- Establishes new mass timber construction types IV-A, IV-B, and IV-C for taller, larger structures
Who It’s For:
Architects, engineers, contractors, code officials, and commercial building developers seeking 2021 code compliance, permitting support, and design reference.
ISBN: 9781609839550
2021 International Building Code – IBC-2021
The 2021 International Building Code® (IBC) provides comprehensive regulations for commercial and multifamily buildings, excluding detached one- and two-family dwellings and townhouses not more than three stories. Developed by the International Code Council (ICC), this model code supports safe, accessible, and sustainable construction through coordinated design and enforcement standards.
Highlights:
- Classifies puzzle/escape rooms as special amusement areas with new egress rules (Section 411)
- Allows separate building treatment for control areas separated by fire walls
- Requires enhanced classroom acoustics in small Group E occupancies per ICC A117.1
- Simplifies requirements for Metal Composite Materials (MCMs); removes sprinkler trade-offs
- Introduces clear guidelines for using shipping containers as buildings
- Adds sprinkler mandates for Group S-2 parking garages over 48,000 sq ft
- Adopts 2017 edition of ICC A117.1 for accessibility standards
- Mandates minimum-height parapets on aggregate-surfaced roofs for safety
- Classifies large assembly buildings (2,500+ occupants) as Risk Category III
- Aligns snow load maps and rain load rules with ASCE 7-16
- Requires special inspection of mass timber anchorage and connections
- Adds inspection requirements for fire-resistant systems in large Group R areas
- Introduces frost protection for egress doors at foundation level
- References ACI 117 and ITG 7 for concrete construction tolerances
- Establishes new mass timber construction types IV-A, IV-B, and IV-C for taller, larger structures
Who It’s For:
Architects, engineers, contractors, code officials, and commercial building developers seeking 2021 code compliance, permitting support, and design reference.
ISBN: 9781609839550
2021 International Fire Code – IFC-2021
The 2021 International Fire Code® (IFC) establishes minimum fire safety standards for new and existing buildings, facilities, and operations. It covers fire prevention, life safety, hazardous materials, and responder protection, making it essential for jurisdictions managing building and fire code enforcement. Fully coordinated with the 2021 I-Codes, it supports a comprehensive regulatory framework.
Highlights:
- Adds fire safety provisions for industrial and non-industrial 3D printing (additive manufacturing)
- Regulates artificial combustible vegetation on rooftops and near buildings
- Expands emergency responder communication system requirements to newer technologies
- Clarifies sprinkler mandates for storage and sale of upholstered furniture and mattresses
- Requires sprinklers in open parking garages that exceed defined fire area thresholds
- Updates standards for installation and removal of energy storage systems (ESS)
- Introduces dedicated chapter for safe storage of distilled spirits and wines in barrels or casks
- Reinforces construction site fire safety with clear roles and planning protocols
Who It’s For:
Fire marshals, building officials, safety consultants, and facility managers responsible for fire code compliance and enforcement.
IFC-2021
2021 International Fire Code – IFC-2021
The 2021 International Fire Code® (IFC) establishes minimum fire safety standards for new and existing buildings, facilities, and operations. It covers fire prevention, life safety, hazardous materials, and responder protection, making it essential for jurisdictions managing building and fire code enforcement. Fully coordinated with the 2021 I-Codes, it supports a comprehensive regulatory framework.
Highlights:
- Adds fire safety provisions for industrial and non-industrial 3D printing (additive manufacturing)
- Regulates artificial combustible vegetation on rooftops and near buildings
- Expands emergency responder communication system requirements to newer technologies
- Clarifies sprinkler mandates for storage and sale of upholstered furniture and mattresses
- Requires sprinklers in open parking garages that exceed defined fire area thresholds
- Updates standards for installation and removal of energy storage systems (ESS)
- Introduces dedicated chapter for safe storage of distilled spirits and wines in barrels or casks
- Reinforces construction site fire safety with clear roles and planning protocols
Who It’s For:
Fire marshals, building officials, safety consultants, and facility managers responsible for fire code compliance and enforcement.
IFC-2021
2021 International Fuel Gas Code – IFGC-2021
The 2021 International Fuel Gas Code® (IFGC) provides comprehensive requirements for the design and installation of fuel gas systems in residential, commercial, and industrial buildings. It governs piping, appliances, combustion air, chimneys, vents, and gaseous hydrogen systems, ensuring safe and efficient fuel gas usage across all occupancies. Fully aligned with the 2021 I-Code suite.
Highlights:
- Regulates natural gas systems up to 125 psig and LP-gas up to 20 psig from point of delivery to appliance shutoff
- Includes complete standards for gaseous hydrogen systems in Chapter 7
- Covers installation, combustion air, and venting for a wide range of fuel gas appliances
- Supports both prescriptive and engineered design methods for air supply, venting, and pipe sizing
- Provides appendices for gas pipe and vent sizing, inspection procedures, and appeals processes
- References updated technical standards from ASME, ANSI, AGA, CSA, and NFPA
- Revised administration chapter clarifies enforcement roles, jurisdictional edits, and appeals
Who It’s For:
Mechanical engineers, gas system designers, inspectors, code officials, and utility providers responsible for safe and compliant gas system installations.
IFGC-2021
2021 International Fuel Gas Code – IFGC-2021
The 2021 International Fuel Gas Code® (IFGC) provides comprehensive requirements for the design and installation of fuel gas systems in residential, commercial, and industrial buildings. It governs piping, appliances, combustion air, chimneys, vents, and gaseous hydrogen systems, ensuring safe and efficient fuel gas usage across all occupancies. Fully aligned with the 2021 I-Code suite.
Highlights:
- Regulates natural gas systems up to 125 psig and LP-gas up to 20 psig from point of delivery to appliance shutoff
- Includes complete standards for gaseous hydrogen systems in Chapter 7
- Covers installation, combustion air, and venting for a wide range of fuel gas appliances
- Supports both prescriptive and engineered design methods for air supply, venting, and pipe sizing
- Provides appendices for gas pipe and vent sizing, inspection procedures, and appeals processes
- References updated technical standards from ASME, ANSI, AGA, CSA, and NFPA
- Revised administration chapter clarifies enforcement roles, jurisdictional edits, and appeals
Who It’s For:
Mechanical engineers, gas system designers, inspectors, code officials, and utility providers responsible for safe and compliant gas system installations.
IFGC-2021
2021 International Plumbing Code – IPC-2021
The 2021 International Plumbing Code® (IPC) establishes minimum standards for the design, installation, and inspection of plumbing systems in all building types—except one- and two-family dwellings and townhouses up to three stories, which are covered under the IRC. This code supports both prescriptive and performance-based approaches and promotes innovation in materials and design.
Highlights:
- Permits multiple-user all-gender toilet facilities
- Adds two approved methods for sewer relining and rehabilitation
- Allows rooftop solar panels to be installed over vent terminals
- Recognizes CSA B805/ICC 805 for rainwater harvesting system design
- Integrates accessibility provisions from ICC A117.1-2017
- Covers potable and nonpotable water, sanitary and storm drainage, venting, water heaters, and graywater systems
- Structured into prescriptive chapters with appendices and accessibility references
- Fully aligned with the 2021 I-Codes for unified plumbing regulation and enforcement
Who It’s For:
Plumbing engineers, contractors, inspectors, and code officials working on compliant, modern plumbing systems in commercial and multifamily buildings.
IPC-2021
2021 International Plumbing Code – IPC-2021
The 2021 International Plumbing Code® (IPC) establishes minimum standards for the design, installation, and inspection of plumbing systems in all building types—except one- and two-family dwellings and townhouses up to three stories, which are covered under the IRC. This code supports both prescriptive and performance-based approaches and promotes innovation in materials and design.
Highlights:
- Permits multiple-user all-gender toilet facilities
- Adds two approved methods for sewer relining and rehabilitation
- Allows rooftop solar panels to be installed over vent terminals
- Recognizes CSA B805/ICC 805 for rainwater harvesting system design
- Integrates accessibility provisions from ICC A117.1-2017
- Covers potable and nonpotable water, sanitary and storm drainage, venting, water heaters, and graywater systems
- Structured into prescriptive chapters with appendices and accessibility references
- Fully aligned with the 2021 I-Codes for unified plumbing regulation and enforcement
Who It’s For:
Plumbing engineers, contractors, inspectors, and code officials working on compliant, modern plumbing systems in commercial and multifamily buildings.
IPC-2021
2021 International Residential Code for One- and Two-Family Dwellings – IRC-2021
The 2021 International Residential Code® (IRC) sets minimum requirements for one- and two-family dwellings and townhouses up to three stories. This official ICC model code consolidates building, mechanical, plumbing, energy, fuel gas, and electrical standards into one unified guide for home construction compliance.
Highlights:
- Covers structural, mechanical, plumbing, HVAC, energy, and electrical systems
- Offers both prescriptive rules and performance-based design flexibility
- Aligns with 2021 I-Codes® for integrated, multi-discipline compliance
- Includes updated energy provisions (NFPA 70, IECC) and appendices for solar, radon, and 3D-printed construction
Who It’s For:
Builders, code officials, engineers, and inspectors involved in residential code compliance, permitting, inspection preparation, or professional reference.
IRC-2021
2021 International Residential Code for One- and Two-Family Dwellings – IRC-2021
The 2021 International Residential Code® (IRC) sets minimum requirements for one- and two-family dwellings and townhouses up to three stories. This official ICC model code consolidates building, mechanical, plumbing, energy, fuel gas, and electrical standards into one unified guide for home construction compliance.
Highlights:
- Covers structural, mechanical, plumbing, HVAC, energy, and electrical systems
- Offers both prescriptive rules and performance-based design flexibility
- Aligns with 2021 I-Codes® for integrated, multi-discipline compliance
- Includes updated energy provisions (NFPA 70, IECC) and appendices for solar, radon, and 3D-printed construction
Who It’s For:
Builders, code officials, engineers, and inspectors involved in residential code compliance, permitting, inspection preparation, or professional reference.
IRC-2021
AWS D1.1/D1.1M:2020 – Structural Welding Code – Steel
AWS D1.1/D1.1M:2020 – Structural Welding Code – Steel is the 24th edition of the code and serves as the definitive standard for welding carbon and low-alloy steel structures. Approved by ANSI and published by the American Welding Society, it reflects the latest best practices in structural welding design, fabrication, and inspection.
Highlights:
- Welding requirements for carbon and low-alloy steels
- Design criteria for welded joints in tubular and nontubular members
- Prequalification standards for Welding Procedure Specifications (WPS)
- Qualification tests for welding procedures and personnel
- Rules for fabrication, inspection, repair, and stud welding
- Guidance for strengthening and retrofitting existing structures
- Covers steel 1/8 in [3 mm] or thicker, up to 100 ksi [690 MPa] yield strength
- Includes mandatory clauses, normative and informative annexes, and detailed commentary
Who It’s For:
Structural engineers, welders, inspectors, and contractors engaged in the design, construction, and quality control of welded steel structures in buildings, bridges, towers, and industrial facilities.
AWS D1.1/D1.1M:2020
AWS D1.1/D1.1M:2020 – Structural Welding Code – Steel
AWS D1.1/D1.1M:2020 – Structural Welding Code – Steel is the 24th edition of the code and serves as the definitive standard for welding carbon and low-alloy steel structures. Approved by ANSI and published by the American Welding Society, it reflects the latest best practices in structural welding design, fabrication, and inspection.
Highlights:
- Welding requirements for carbon and low-alloy steels
- Design criteria for welded joints in tubular and nontubular members
- Prequalification standards for Welding Procedure Specifications (WPS)
- Qualification tests for welding procedures and personnel
- Rules for fabrication, inspection, repair, and stud welding
- Guidance for strengthening and retrofitting existing structures
- Covers steel 1/8 in [3 mm] or thicker, up to 100 ksi [690 MPa] yield strength
- Includes mandatory clauses, normative and informative annexes, and detailed commentary
Who It’s For:
Structural engineers, welders, inspectors, and contractors engaged in the design, construction, and quality control of welded steel structures in buildings, bridges, towers, and industrial facilities.
AWS D1.1/D1.1M:2020
ISO 9001:2015 – Quality Management Systems: Requirements (Fifth Edition), 2015
ISO 9001:2015 – Quality Management Systems: Requirements (Fifth Edition) specifies the international criteria for a quality management system (QMS) and is the globally recognized benchmark for organizations seeking to improve performance, meet customer expectations, and demonstrate commitment to quality. This standard applies to any organization, regardless of size or industry, and is built on principles including customer focus, leadership, risk-based thinking, and continuous improvement.
Highlights:
- Defines core QMS requirements for planning, implementation, maintenance, and improvement
- Covers organizational context, leadership roles, documented information, and resource management
- Provides structured framework for process-based quality assurance and performance evaluation
- Integrates risk-based thinking into planning, operations, and decision-making
- Emphasizes customer satisfaction, conformity, and continual improvement
- Aligns with Annex SL for easy integration with other ISO management standards
- Includes terms, definitions, and guidance for practical implementation
- Applicable to manufacturing, service, and public sector organizations
Who It’s For:
Quality managers, compliance officers, and auditors responsible for establishing, maintaining, or certifying a quality management system that aligns with international standards.
ISO 9001:2015
ISO 9001:2015 – Quality Management Systems: Requirements (Fifth Edition), 2015
ISO 9001:2015 – Quality Management Systems: Requirements (Fifth Edition) specifies the international criteria for a quality management system (QMS) and is the globally recognized benchmark for organizations seeking to improve performance, meet customer expectations, and demonstrate commitment to quality. This standard applies to any organization, regardless of size or industry, and is built on principles including customer focus, leadership, risk-based thinking, and continuous improvement.
Highlights:
- Defines core QMS requirements for planning, implementation, maintenance, and improvement
- Covers organizational context, leadership roles, documented information, and resource management
- Provides structured framework for process-based quality assurance and performance evaluation
- Integrates risk-based thinking into planning, operations, and decision-making
- Emphasizes customer satisfaction, conformity, and continual improvement
- Aligns with Annex SL for easy integration with other ISO management standards
- Includes terms, definitions, and guidance for practical implementation
- Applicable to manufacturing, service, and public sector organizations
Who It’s For:
Quality managers, compliance officers, and auditors responsible for establishing, maintaining, or certifying a quality management system that aligns with international standards.
ISO 9001:2015
