ANSI Z535.4-2011 (R2017): Product Safety Signs and Labels
ANSI Z535.4-2011 (R2017): Product Safety Signs and Labels provides standardized guidance for the design and application of product safety signs and labels. This reaffirmed edition helps manufacturers effectively communicate hazard information to reduce risk and improve safety across a wide range of industrial and consumer products.
Highlights:
- Defines use of standardized signal words: DANGER, WARNING, CAUTION, and NOTICE
- Establishes hazard classification systems and formatting conventions
- Specifies layout, safety colors, symbols, and typography for clear communication
- Offers guidance on incorporating safety symbols for universal understanding
- Sets durability requirements for labels exposed to harsh environments
- Recommends best practices for label placement and visibility
Who It’s For:
A vital reference for engineers, product designers, compliance managers, and safety professionals responsible for labeling products in accordance with ANSI safety communication standards.
ANSI-Z535.4-2011-R2017
ANSI Z535.4-2011 (R2017): Product Safety Signs and Labels
ANSI Z535.4-2011 (R2017): Product Safety Signs and Labels provides standardized guidance for the design and application of product safety signs and labels. This reaffirmed edition helps manufacturers effectively communicate hazard information to reduce risk and improve safety across a wide range of industrial and consumer products.
Highlights:
- Defines use of standardized signal words: DANGER, WARNING, CAUTION, and NOTICE
- Establishes hazard classification systems and formatting conventions
- Specifies layout, safety colors, symbols, and typography for clear communication
- Offers guidance on incorporating safety symbols for universal understanding
- Sets durability requirements for labels exposed to harsh environments
- Recommends best practices for label placement and visibility
Who It’s For:
A vital reference for engineers, product designers, compliance managers, and safety professionals responsible for labeling products in accordance with ANSI safety communication standards.
ANSI-Z535.4-2011-R2017
ANSI/ASHRAE 62.1-2019: Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE Standard 62.1-2019: Ventilation for Acceptable Indoor Air Quality establishes minimum requirements for ventilation system design, installation, and maintenance in commercial and institutional buildings. This standard is a foundational reference for achieving acceptable indoor air quality (IAQ) and reducing health risks associated with poor ventilation.
Highlights:
- Updated Ventilation Rate Procedure with enhanced zone-level calculation methods
- Revised Natural Ventilation Procedure, including outdoor air quality and mechanical integration
- Prohibits use of ozone-generating air-cleaning devices
- Requires humidity control using dew point rather than relative humidity
- Separates patient care areas now governed under ASHRAE/ASHE Standard 170
- Clarifies definitions for spaces, ventilation zones, and contaminant sources
- Outlines requirements for design documentation, commissioning, and IAQ performance testing
- Includes appendices with ventilation rate rationale, IAQ procedures, and engineering tools
Who It’s For:
A critical reference for mechanical engineers, HVAC designers, facility managers, and code officials involved in ensuring compliant ventilation design and indoor air quality performance.
ASHRAE-62.1-2019
ANSI/ASHRAE 62.1-2019: Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE Standard 62.1-2019: Ventilation for Acceptable Indoor Air Quality establishes minimum requirements for ventilation system design, installation, and maintenance in commercial and institutional buildings. This standard is a foundational reference for achieving acceptable indoor air quality (IAQ) and reducing health risks associated with poor ventilation.
Highlights:
- Updated Ventilation Rate Procedure with enhanced zone-level calculation methods
- Revised Natural Ventilation Procedure, including outdoor air quality and mechanical integration
- Prohibits use of ozone-generating air-cleaning devices
- Requires humidity control using dew point rather than relative humidity
- Separates patient care areas now governed under ASHRAE/ASHE Standard 170
- Clarifies definitions for spaces, ventilation zones, and contaminant sources
- Outlines requirements for design documentation, commissioning, and IAQ performance testing
- Includes appendices with ventilation rate rationale, IAQ procedures, and engineering tools
Who It’s For:
A critical reference for mechanical engineers, HVAC designers, facility managers, and code officials involved in ensuring compliant ventilation design and indoor air quality performance.
ASHRAE-62.1-2019
ANSI/ASHRAE 62.1-2022: Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE Standard 62.1-2022: Ventilation for Acceptable Indoor Air Quality defines minimum requirements for mechanical and natural ventilation systems in commercial, institutional, and industrial buildings. Widely referenced by model codes such as the International Building Code, this standard is critical for achieving acceptable indoor air quality (IAQ) in non-residential environments.
Highlights:
- Defines procedures for assessing outdoor air quality and ventilation by occupancy type
- Revised Section 5 reorganizes systems/equipment content by airflow path
- Updates IAQ Procedure with design compound guidance and mass-balance modeling
- Establishes separation distances for exhaust air and dew point limits for cooled spaces
- Classifies ventilation zones and defines airflow effectiveness and breathing zone metrics
- Covers design, installation, commissioning, and maintenance of ventilation systems
- Includes appendices for healthcare settings, air quality evaluation, compliance paths, and simplified rate calculations
- Incorporates addenda through Appendix Q as part of its continuous maintenance model
Who It’s For:
Designed for mechanical engineers, HVAC professionals, code officials, and facility managers responsible for designing and maintaining compliant ventilation systems that promote occupant health and comfort.
ASHRAE 62.1-2022
ANSI/ASHRAE 62.1-2022: Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE Standard 62.1-2022: Ventilation for Acceptable Indoor Air Quality defines minimum requirements for mechanical and natural ventilation systems in commercial, institutional, and industrial buildings. Widely referenced by model codes such as the International Building Code, this standard is critical for achieving acceptable indoor air quality (IAQ) in non-residential environments.
Highlights:
- Defines procedures for assessing outdoor air quality and ventilation by occupancy type
- Revised Section 5 reorganizes systems/equipment content by airflow path
- Updates IAQ Procedure with design compound guidance and mass-balance modeling
- Establishes separation distances for exhaust air and dew point limits for cooled spaces
- Classifies ventilation zones and defines airflow effectiveness and breathing zone metrics
- Covers design, installation, commissioning, and maintenance of ventilation systems
- Includes appendices for healthcare settings, air quality evaluation, compliance paths, and simplified rate calculations
- Incorporates addenda through Appendix Q as part of its continuous maintenance model
Who It’s For:
Designed for mechanical engineers, HVAC professionals, code officials, and facility managers responsible for designing and maintaining compliant ventilation systems that promote occupant health and comfort.
ASHRAE 62.1-2022
API 650: Welded Tanks for Oil Storage, 13th Edition (2020)
API 650: Welded Tanks for Oil Storage, 13th Edition (2020) sets the standard for the design, construction, and inspection of vertical, cylindrical, aboveground welded storage tanks operating near atmospheric pressure. Intended for non-refrigerated service up to 93°C (200°F), this specification is essential for tanks used in the storage of petroleum, chemicals, and other liquid products.
Highlights:
- Covers open-top and closed-top tank design for a wide range of capacities
- Allows construction using carbon steel, stainless steel, and duplex steel materials
- Specifies requirements for shell, bottom, roof, nozzle components, and structural supports
- Provides detailed material selection guidance and limits for plates, flanges, and welding consumables
- Defines procedures for welding, welder qualification, and weld inspection
- Includes standards for erection, hydrostatic testing, tolerances, and repair methods
- Annexes address specialized applications:
- Seismic design (Annex E)
- Floating roofs (Annexes C and H)
- Aluminum and stainless steel tanks (Annexes AL and S)
- Elevated temperature service (Annex M)
- Leak detection, under-bottom connections (Annexes I and O)
- API Monogram licensing (Annex Y)
Who It’s For:
A critical reference for storage tank engineers, fabricators, inspectors, and facility operators involved in tank design, procurement, fabrication, and field erection in the oil, gas, chemical, and industrial sectors.
API 650-2020
API 650: Welded Tanks for Oil Storage, 13th Edition (2020)
API 650: Welded Tanks for Oil Storage, 13th Edition (2020) sets the standard for the design, construction, and inspection of vertical, cylindrical, aboveground welded storage tanks operating near atmospheric pressure. Intended for non-refrigerated service up to 93°C (200°F), this specification is essential for tanks used in the storage of petroleum, chemicals, and other liquid products.
Highlights:
- Covers open-top and closed-top tank design for a wide range of capacities
- Allows construction using carbon steel, stainless steel, and duplex steel materials
- Specifies requirements for shell, bottom, roof, nozzle components, and structural supports
- Provides detailed material selection guidance and limits for plates, flanges, and welding consumables
- Defines procedures for welding, welder qualification, and weld inspection
- Includes standards for erection, hydrostatic testing, tolerances, and repair methods
- Annexes address specialized applications:
- Seismic design (Annex E)
- Floating roofs (Annexes C and H)
- Aluminum and stainless steel tanks (Annexes AL and S)
- Elevated temperature service (Annex M)
- Leak detection, under-bottom connections (Annexes I and O)
- API Monogram licensing (Annex Y)
Who It’s For:
A critical reference for storage tank engineers, fabricators, inspectors, and facility operators involved in tank design, procurement, fabrication, and field erection in the oil, gas, chemical, and industrial sectors.
API 650-2020
Applied Behavior Analysis (3rd Edition) by John O. Cooper, Timothy E. Heron, William L. Heward
Applied Behavior Analysis (3rd Edition) is the authoritative resource for understanding and applying the principles of behavior analysis across educational, clinical, and organizational settings. Written by renowned experts Cooper, Heron, and Heward, this edition integrates conceptual, empirical, and practical elements essential for behavior analysts, educators, and students alike.
Highlights:
- Aligned with the Behavior Analyst Certification Board® BCBA/BCaBA Task List (5th ed.)
- Includes over 1,000 new citations from contemporary research in behavior analysis
- Features contributions from leading scholars on ethics, verbal behavior, motivating operations, and more
- Presents detailed examples, graphs, and procedures grounded in real-world practice
- Supports development of technical fluency, data-driven decision-making, and ethical competence
- Organized for foundational coursework, supervised practice, and certification preparation
Who It’s For:
Students, clinicians, educators, researchers, and certification candidates in applied behavior analysis seeking a rigorous and practical foundation in the science of behavior.
ISBN-13: 9780134752556
Applied Behavior Analysis (3rd Edition) by John O. Cooper, Timothy E. Heron, William L. Heward
Applied Behavior Analysis (3rd Edition) is the authoritative resource for understanding and applying the principles of behavior analysis across educational, clinical, and organizational settings. Written by renowned experts Cooper, Heron, and Heward, this edition integrates conceptual, empirical, and practical elements essential for behavior analysts, educators, and students alike.
Highlights:
- Aligned with the Behavior Analyst Certification Board® BCBA/BCaBA Task List (5th ed.)
- Includes over 1,000 new citations from contemporary research in behavior analysis
- Features contributions from leading scholars on ethics, verbal behavior, motivating operations, and more
- Presents detailed examples, graphs, and procedures grounded in real-world practice
- Supports development of technical fluency, data-driven decision-making, and ethical competence
- Organized for foundational coursework, supervised practice, and certification preparation
Who It’s For:
Students, clinicians, educators, researchers, and certification candidates in applied behavior analysis seeking a rigorous and practical foundation in the science of behavior.
ISBN-13: 9780134752556
ASCE 24-14: Flood Resistant Design and Construction, 2014
ASCE 24-14: Flood Resistant Design and Construction provides minimum requirements for the planning, design, and construction of buildings in flood-prone areas. Referenced by the International Building Code (IBC) and the National Flood Insurance Program (NFIP), this standard supports floodplain management regulations and promotes resilience through engineering best practices.
Highlights:
- Defines Flood Design Class (1–4) to guide risk-based design criteria
- Specifies elevation requirements based on flood hazard zones, building type, and occupancy
- Includes wet and dry floodproofing methods for commercial and residential applications
- Updates flood opening requirements including engineered vent systems and louvers
- Provides structural design standards for Coastal A Zones and coastal high hazard areas
- Identifies acceptable flood damage-resistant materials and construction techniques
- Covers tanks, utilities, egress, garages, and parking structures in flood-prone zones
- Offers guidance for substantial improvements and retrofitting of existing buildings
- Coordinates with ASCE 7 and NFIP regulations to ensure code consistency and compliance
Who It’s For:
Essential for civil engineers, architects, code officials, and builders involved in flood zone development, permitting, and compliance with FEMA, IBC, and local floodplain standards.
ASCE 24-2014
ASCE 24-14: Flood Resistant Design and Construction, 2014
ASCE 24-14: Flood Resistant Design and Construction provides minimum requirements for the planning, design, and construction of buildings in flood-prone areas. Referenced by the International Building Code (IBC) and the National Flood Insurance Program (NFIP), this standard supports floodplain management regulations and promotes resilience through engineering best practices.
Highlights:
- Defines Flood Design Class (1–4) to guide risk-based design criteria
- Specifies elevation requirements based on flood hazard zones, building type, and occupancy
- Includes wet and dry floodproofing methods for commercial and residential applications
- Updates flood opening requirements including engineered vent systems and louvers
- Provides structural design standards for Coastal A Zones and coastal high hazard areas
- Identifies acceptable flood damage-resistant materials and construction techniques
- Covers tanks, utilities, egress, garages, and parking structures in flood-prone zones
- Offers guidance for substantial improvements and retrofitting of existing buildings
- Coordinates with ASCE 7 and NFIP regulations to ensure code consistency and compliance
Who It’s For:
Essential for civil engineers, architects, code officials, and builders involved in flood zone development, permitting, and compliance with FEMA, IBC, and local floodplain standards.
ASCE 24-2014
ASME B16.5-2020: Pipe Flanges and Flanged Fittings
Product Summary:
ASME B16.5-2020 defines the requirements for pipe flanges and flanged fittings in sizes NPS ½ through NPS 24, covering pressure–temperature ratings, dimensions, tolerances, materials, and testing. It applies to components used in bolted flange joints made from cast, forged, or plate materials in industrial piping systems.
Key Features:
- Pressure–temperature ratings for Classes 150 through 2500
- Dimensional standards for weld neck, blind, reducing, and other flange types
- Specifications for bolting materials, gaskets, and flange assembly practices
- Manufacturing tolerances and permanent marking requirements
- Material listings with corresponding ASTM designations for forgings, castings, and plates
- Guidance on gasket selection, bolted joint design, and system hydrotesting
- Appendices covering bolt length calculations, pressure rating derivation, and quality system standards
- Metric and U.S. Customary units presented side-by-side for reference
Who It’s For:
Essential for piping designers, mechanical engineers, fabricators, and QA/QC personnel involved in pressure piping systems across oil, gas, chemical, and industrial sectors.
ASME B16.5-2020
ASME B16.5-2020: Pipe Flanges and Flanged Fittings
Product Summary:
ASME B16.5-2020 defines the requirements for pipe flanges and flanged fittings in sizes NPS ½ through NPS 24, covering pressure–temperature ratings, dimensions, tolerances, materials, and testing. It applies to components used in bolted flange joints made from cast, forged, or plate materials in industrial piping systems.
Key Features:
- Pressure–temperature ratings for Classes 150 through 2500
- Dimensional standards for weld neck, blind, reducing, and other flange types
- Specifications for bolting materials, gaskets, and flange assembly practices
- Manufacturing tolerances and permanent marking requirements
- Material listings with corresponding ASTM designations for forgings, castings, and plates
- Guidance on gasket selection, bolted joint design, and system hydrotesting
- Appendices covering bolt length calculations, pressure rating derivation, and quality system standards
- Metric and U.S. Customary units presented side-by-side for reference
Who It’s For:
Essential for piping designers, mechanical engineers, fabricators, and QA/QC personnel involved in pressure piping systems across oil, gas, chemical, and industrial sectors.
ASME B16.5-2020
ASME B31.3-2022: Process Piping
ASME B31.3-2022: Process Piping provides comprehensive engineering requirements for the design, materials, fabrication, examination, testing, and safety of process piping systems used in petroleum refineries, chemical plants, pharmaceutical facilities, textile plants, paper mills, and related processing plants and terminals. It is a vital code for ensuring piping integrity in high-pressure, high-temperature, and corrosive service environments.
Highlights:
- Applies to metallic and nonmetallic piping for chemicals, petroleum, natural gas, and related fluids
- Covers piping components: pipe, flanges, valves, gaskets, bolts, expansion joints, and supports
- Design criteria for internal pressure, sustained loads, displacement strains, and occasional loads
- Construction requirements including welding, brazing, bending, assembly, and material specifications
- Mandatory rules for examination, testing, inspection, and leak testing procedures
- Stress range reduction factors, flexibility analysis, and allowable stress values by material and temperature
- Qualification requirements for personnel, procedures, and fabrication documentation
- Integration with ASME Section IX for welding and ASME B31.1 for power piping interfaces
- Updated stress tables and revisions to weld design rules in para. 328.5.2
- Errata incorporated for clarity on strength tables and weld joint tolerances
Who It’s For:
Mechanical engineers, piping designers, fabricators, inspectors, and maintenance teams working on the safe and code-compliant construction and modification of process piping systems across industries.
B31.3-2022
ASME B31.3-2022: Process Piping
ASME B31.3-2022: Process Piping provides comprehensive engineering requirements for the design, materials, fabrication, examination, testing, and safety of process piping systems used in petroleum refineries, chemical plants, pharmaceutical facilities, textile plants, paper mills, and related processing plants and terminals. It is a vital code for ensuring piping integrity in high-pressure, high-temperature, and corrosive service environments.
Highlights:
- Applies to metallic and nonmetallic piping for chemicals, petroleum, natural gas, and related fluids
- Covers piping components: pipe, flanges, valves, gaskets, bolts, expansion joints, and supports
- Design criteria for internal pressure, sustained loads, displacement strains, and occasional loads
- Construction requirements including welding, brazing, bending, assembly, and material specifications
- Mandatory rules for examination, testing, inspection, and leak testing procedures
- Stress range reduction factors, flexibility analysis, and allowable stress values by material and temperature
- Qualification requirements for personnel, procedures, and fabrication documentation
- Integration with ASME Section IX for welding and ASME B31.1 for power piping interfaces
- Updated stress tables and revisions to weld design rules in para. 328.5.2
- Errata incorporated for clarity on strength tables and weld joint tolerances
Who It’s For:
Mechanical engineers, piping designers, fabricators, inspectors, and maintenance teams working on the safe and code-compliant construction and modification of process piping systems across industries.
B31.3-2022
ASME BPVC 2025 Code Cases: Boilers and Pressure Vessels
ASME BPVC 2025 Code Cases: Boilers and Pressure Vessels provides approved alternatives and interpretations to the rules in the ASME Boiler and Pressure Vessel Code. These code cases allow for the safe and practical use of new materials, designs, and construction methods that may not yet be included in the main Code.
The 2025 edition compiles the latest approved cases, offering engineers, manufacturers, and inspectors up-to-date guidance to address evolving industry practices. Code cases serve as official supplements, ensuring that the design, fabrication, inspection, and certification of boilers and pressure vessels remain in compliance with ASME standards while accommodating innovation.
This resource is essential for professionals involved in boiler and pressure vessel construction, design, operation, and compliance. It supports safe engineering practices while providing flexibility for emerging technologies and materials within the framework of the ASME BPVC.
ASME BPVC 2025 Code Cases: Boilers and Pressure Vessels
ASME BPVC 2025 Code Cases: Boilers and Pressure Vessels provides approved alternatives and interpretations to the rules in the ASME Boiler and Pressure Vessel Code. These code cases allow for the safe and practical use of new materials, designs, and construction methods that may not yet be included in the main Code.
The 2025 edition compiles the latest approved cases, offering engineers, manufacturers, and inspectors up-to-date guidance to address evolving industry practices. Code cases serve as official supplements, ensuring that the design, fabrication, inspection, and certification of boilers and pressure vessels remain in compliance with ASME standards while accommodating innovation.
This resource is essential for professionals involved in boiler and pressure vessel construction, design, operation, and compliance. It supports safe engineering practices while providing flexibility for emerging technologies and materials within the framework of the ASME BPVC.
ASME BPVC 2025 Section I: Rules for Construction of Power Boilers
ASME BPVC 2025 Section I: Rules for Construction of Power Boilers provides the official design, fabrication, and inspection requirements for power, electric, and miniature boilers, as well as high-temperature water boilers and heat recovery steam generators.
This edition incorporates updated rules on certification mark usage, designator requirements (V, A, M, PP, S, and E), superheaters, economizers, and fired pressure vessel attachments. It ensures compliance across stationary, locomotive, portable, and traction boiler services.
Designed for engineers, manufacturers, inspectors, and regulatory agencies, this ANSI/ASME standard is essential for safe and code-compliant construction of boiler systems.
ASME BPVC 2025 Section I: Rules for Construction of Power Boilers
ASME BPVC 2025 Section I: Rules for Construction of Power Boilers provides the official design, fabrication, and inspection requirements for power, electric, and miniature boilers, as well as high-temperature water boilers and heat recovery steam generators.
This edition incorporates updated rules on certification mark usage, designator requirements (V, A, M, PP, S, and E), superheaters, economizers, and fired pressure vessel attachments. It ensures compliance across stationary, locomotive, portable, and traction boiler services.
Designed for engineers, manufacturers, inspectors, and regulatory agencies, this ANSI/ASME standard is essential for safe and code-compliant construction of boiler systems.
ASME BPVC 2025 Section II, Part A: Ferrous Material Specifications, SA-1 to SA-450
The ASME BPVC 2025 Section II, Part A: SA-1 to SA-450 provides the complete set of ferrous material specifications from SA-1 through SA-450. This volume is essential for engineers, designers, and inspectors working with boilers and pressure vessels, offering up-to-date requirements for material selection and code compliance.
ASME BPVC 2025 Section II, Part A: Ferrous Material Specifications, SA-1 to SA-450
The ASME BPVC 2025 Section II, Part A: SA-1 to SA-450 provides the complete set of ferrous material specifications from SA-1 through SA-450. This volume is essential for engineers, designers, and inspectors working with boilers and pressure vessels, offering up-to-date requirements for material selection and code compliance.
ASME BPVC 2025 Section II, Part A: Ferrous Material Specifications, SA-451 to End
ASME BPVC 2025 Section II, Part A: Ferrous Material Specifications, SA-451 to End provides the official material specifications for ferrous metals used in the construction of boilers and pressure vessels. This volume covers specifications from SA-451 through the end of the ferrous listings, ensuring compliance with ASME standards for safety, performance, and quality.
This section is an essential reference for engineers, manufacturers, inspectors, and other professionals who require accurate and up-to-date standards for ferrous materials in pressure equipment design and fabrication.
ASME BPVC 2025 Section II, Part A: Ferrous Material Specifications, SA-451 to End
ASME BPVC 2025 Section II, Part A: Ferrous Material Specifications, SA-451 to End provides the official material specifications for ferrous metals used in the construction of boilers and pressure vessels. This volume covers specifications from SA-451 through the end of the ferrous listings, ensuring compliance with ASME standards for safety, performance, and quality.
This section is an essential reference for engineers, manufacturers, inspectors, and other professionals who require accurate and up-to-date standards for ferrous materials in pressure equipment design and fabrication.
