2024 International Building Code – IBC-2024
The 2024 International Building Code® (IBC) provides coordinated regulations for the construction, alteration, addition, repair, and maintenance of commercial and multifamily buildings. Published by the International Code Council (ICC), this model code is used across jurisdictions to ensure safe, accessible, and sustainable construction through enforceable design and inspection standards. The 2024 edition introduces substantial updates reflecting emerging building technologies, revised load criteria, and digital integration tools.
Highlights:
- Structural load criteria updated per ASCE 7-22 for wind, seismic, snow, rain, and flood
- Revised risk categories, construction types, and fire-resistance ratings
- Enhancements to accessibility provisions aligned with ICC A117.1-2017
- Mass timber rules expanded for taller and larger buildings under new Type IV classifications
- New requirements for storm shelters in specific educational and emergency facilities
- Improved fire protection systems and egress strategies for large occupant loads
- QR-coded references for change tracking and digital plan review integration
- Updated mechanical, electrical, plumbing, and energy provisions through I-Code coordination
- Appendices revised for tsunami design, grading, rodentproofing, and replicable buildings
- Expanded support for modular and off-site construction methodologies
Who It’s For:
Architects, engineers, contractors, building officials, and developers needing full compliance with 2024 code updates for plan review, permitting, and construction documentation.
IBC-2024
2024 International Building Code – IBC-2024
The 2024 International Building Code® (IBC) provides coordinated regulations for the construction, alteration, addition, repair, and maintenance of commercial and multifamily buildings. Published by the International Code Council (ICC), this model code is used across jurisdictions to ensure safe, accessible, and sustainable construction through enforceable design and inspection standards. The 2024 edition introduces substantial updates reflecting emerging building technologies, revised load criteria, and digital integration tools.
Highlights:
- Structural load criteria updated per ASCE 7-22 for wind, seismic, snow, rain, and flood
- Revised risk categories, construction types, and fire-resistance ratings
- Enhancements to accessibility provisions aligned with ICC A117.1-2017
- Mass timber rules expanded for taller and larger buildings under new Type IV classifications
- New requirements for storm shelters in specific educational and emergency facilities
- Improved fire protection systems and egress strategies for large occupant loads
- QR-coded references for change tracking and digital plan review integration
- Updated mechanical, electrical, plumbing, and energy provisions through I-Code coordination
- Appendices revised for tsunami design, grading, rodentproofing, and replicable buildings
- Expanded support for modular and off-site construction methodologies
Who It’s For:
Architects, engineers, contractors, building officials, and developers needing full compliance with 2024 code updates for plan review, permitting, and construction documentation.
IBC-2024
60 Minute Profits – Discover the High Speed Money Making Strategies of the Pros
- Get approved and earn instant PayPal commissions with affiliate networks.
- Identify and capitalize on high-performing product launches.
- Use PLR bonuses to dramatically boost your conversion rates.
- Set up a lead generation system in under an hour.
- Trigger fast, targeted traffic from forums, blogs, social media, and Q&A sites.
60 Minute Profits – Discover the High Speed Money Making Strategies of the Pros
- Get approved and earn instant PayPal commissions with affiliate networks.
- Identify and capitalize on high-performing product launches.
- Use PLR bonuses to dramatically boost your conversion rates.
- Set up a lead generation system in under an hour.
- Trigger fast, targeted traffic from forums, blogs, social media, and Q&A sites.
A Guide to the Project Management Body of Knowledge (PMBOK Guide) – Eighth Edition and The Standard for Project Management
A Guide to the Project Management Body of Knowledge (PMBOK Guide) - Eighth Edition and The Standard for Project Management combines the PMBOK Guide (Eighth Edition) with The Standard for Project Management in a single reference that supports predictive, hybrid, and adaptive approaches across industries and project environments. The Eighth Edition introduces a principle-based structure and organizes guidance around focus areas and performance domains, helping practitioners apply project management concepts in a flexible, outcome-oriented way.
- Includes The Standard for Project Management
- Principle-based guidance for modern project management
- Applicable to predictive, hybrid, and adaptive delivery approaches
- Emphasis on value delivery and practical tailoring
A Guide to the Project Management Body of Knowledge (PMBOK Guide) – Eighth Edition and The Standard for Project Management
A Guide to the Project Management Body of Knowledge (PMBOK Guide) - Eighth Edition and The Standard for Project Management combines the PMBOK Guide (Eighth Edition) with The Standard for Project Management in a single reference that supports predictive, hybrid, and adaptive approaches across industries and project environments. The Eighth Edition introduces a principle-based structure and organizes guidance around focus areas and performance domains, helping practitioners apply project management concepts in a flexible, outcome-oriented way.
- Includes The Standard for Project Management
- Principle-based guidance for modern project management
- Applicable to predictive, hybrid, and adaptive delivery approaches
- Emphasis on value delivery and practical tailoring
A Guide to the Project Management Body of Knowledge (PMBOK Guide) – Seventh Edition
This edition combines The Standard for Project Management with the PMBOK® Guide, reflecting the latest evolution of the project management profession. It introduces 12 principles of project management and eight performance domains essential for delivering project outcomes effectively.
The guide expands on development approaches, including predictive, adaptive, agile, hybrid, and others. It features a dedicated section on tailoring methods to specific contexts, a new framework of models, methods, and artifacts, and a stronger emphasis on outcomes and value delivery. It also integrates with PMIstandards+, a digital content platform that offers practical resources for applying the guide in professional settings.
Intended for project practitioners, consultants, educators, students, sponsors, and stakeholders, this edition serves as a foundational reference for understanding modern project management across industries and organizational contexts.
A Guide to the Project Management Body of Knowledge (PMBOK Guide) – Seventh Edition
This edition combines The Standard for Project Management with the PMBOK® Guide, reflecting the latest evolution of the project management profession. It introduces 12 principles of project management and eight performance domains essential for delivering project outcomes effectively.
The guide expands on development approaches, including predictive, adaptive, agile, hybrid, and others. It features a dedicated section on tailoring methods to specific contexts, a new framework of models, methods, and artifacts, and a stronger emphasis on outcomes and value delivery. It also integrates with PMIstandards+, a digital content platform that offers practical resources for applying the guide in professional settings.
Intended for project practitioners, consultants, educators, students, sponsors, and stakeholders, this edition serves as a foundational reference for understanding modern project management across industries and organizational contexts.
A World of Art – 8th Edition by Henry M. Sayre (Pearson, 2015)
A World of Art (8th Edition) by Henry M. Sayre is a bestselling art appreciation textbook that introduces readers to visual culture through a global lens. This full-color edition presents more than 700 artworks across time periods and styles, using accessible language to promote critical thinking and creative exploration.
Highlights:
- Comprehensive survey of global art, past and present
- Over 700 high-quality images, including classical, modern, and contemporary works
- Thematic chapters on identity, spirituality, power, and life cycles
- Visual analysis tools and creative process walkthroughs
- Student-friendly layout with guided questions and definitions
- Ideal for college-level Art Appreciation, Humanities, and Visual Culture courses
- Supports visual literacy, cultural awareness, and analytical skills
Who It’s For:
Students, educators, and institutions seeking a well-structured, engaging resource for introductory art courses. Also suitable for general readers interested in understanding how art reflects and shapes human experience.
A World of Art – 8th Edition by Henry M. Sayre (Pearson, 2015)
A World of Art (8th Edition) by Henry M. Sayre is a bestselling art appreciation textbook that introduces readers to visual culture through a global lens. This full-color edition presents more than 700 artworks across time periods and styles, using accessible language to promote critical thinking and creative exploration.
Highlights:
- Comprehensive survey of global art, past and present
- Over 700 high-quality images, including classical, modern, and contemporary works
- Thematic chapters on identity, spirituality, power, and life cycles
- Visual analysis tools and creative process walkthroughs
- Student-friendly layout with guided questions and definitions
- Ideal for college-level Art Appreciation, Humanities, and Visual Culture courses
- Supports visual literacy, cultural awareness, and analytical skills
Who It’s For:
Students, educators, and institutions seeking a well-structured, engaging resource for introductory art courses. Also suitable for general readers interested in understanding how art reflects and shapes human experience.
AASHTO GL-7: Roadway Lighting Design Guide, 7th Edition (2018)
AASHTO GL-7: Roadway Lighting Design Guide, Seventh Edition (2018) provides comprehensive guidance on the planning, design, and implementation of roadway lighting systems. This edition reflects current engineering practices, safety standards, and lighting technologies to enhance visibility, energy efficiency, and operational reliability across modern transportation networks.
Highlights:
- Design principles covering illuminance, luminance, uniformity, and glare control
- Guidance on developing master roadway lighting plans and policies
- Recommended lighting levels for highways, streets, intersections, and pedestrian zones
- Design criteria for tunnels, underpasses, and bridges
- Considerations for temporary lighting in work zones and construction areas
- Evaluation of emerging technologies such as adaptive lighting and smart controls
- Discussion on lighting management systems and energy-efficient solutions
- Environmental impact assessments and aesthetic integration strategies
- Standards for pole placement, maintenance access, and safety
- Support for decision-making with traffic data and community planning considerations
Who It’s For:
An essential reference for transportation agencies, civil engineers, and planners responsible for roadway lighting design and policy development.
GL-7-2018
AASHTO GL-7: Roadway Lighting Design Guide, 7th Edition (2018)
AASHTO GL-7: Roadway Lighting Design Guide, Seventh Edition (2018) provides comprehensive guidance on the planning, design, and implementation of roadway lighting systems. This edition reflects current engineering practices, safety standards, and lighting technologies to enhance visibility, energy efficiency, and operational reliability across modern transportation networks.
Highlights:
- Design principles covering illuminance, luminance, uniformity, and glare control
- Guidance on developing master roadway lighting plans and policies
- Recommended lighting levels for highways, streets, intersections, and pedestrian zones
- Design criteria for tunnels, underpasses, and bridges
- Considerations for temporary lighting in work zones and construction areas
- Evaluation of emerging technologies such as adaptive lighting and smart controls
- Discussion on lighting management systems and energy-efficient solutions
- Environmental impact assessments and aesthetic integration strategies
- Standards for pole placement, maintenance access, and safety
- Support for decision-making with traffic data and community planning considerations
Who It’s For:
An essential reference for transportation agencies, civil engineers, and planners responsible for roadway lighting design and policy development.
GL-7-2018
AASHTO HB-17: Standard Specifications for Highway Bridges, 17th Edition (2002)
AASHTO HB-17: Standard Specifications for Highway Bridges, 17th Edition (2002) provides comprehensive criteria for the design, construction, and maintenance of highway bridges throughout the United States. This edition is the final update prior to the nationwide adoption of Load and Resistance Factor Design (LRFD) standards.
Highlights:
- General provisions for bridge design, structural analysis, and performance
- Criteria for superstructures, substructures, abutments, culverts, and piers
- Service load and load factor design methods for concrete, steel, timber, and prestressed components
- Requirements for foundations, retaining structures, and soil-structure interaction
- Specifications addressing load distribution, fatigue, seismic considerations, and strength evaluation
- Commentary and notes incorporating interim revisions through 2003
- References to supporting standards from AASHTO, ASTM, AWS, and others
- Applicable to rehabilitation, legacy design validation, and maintenance planning for non-LRFD bridges
Who It’s For:
A critical reference for bridge engineers, transportation officials, and contractors working with legacy structures or evaluating designs developed before the transition to LRFD.
HB-17-2002
AASHTO HB-17: Standard Specifications for Highway Bridges, 17th Edition (2002)
AASHTO HB-17: Standard Specifications for Highway Bridges, 17th Edition (2002) provides comprehensive criteria for the design, construction, and maintenance of highway bridges throughout the United States. This edition is the final update prior to the nationwide adoption of Load and Resistance Factor Design (LRFD) standards.
Highlights:
- General provisions for bridge design, structural analysis, and performance
- Criteria for superstructures, substructures, abutments, culverts, and piers
- Service load and load factor design methods for concrete, steel, timber, and prestressed components
- Requirements for foundations, retaining structures, and soil-structure interaction
- Specifications addressing load distribution, fatigue, seismic considerations, and strength evaluation
- Commentary and notes incorporating interim revisions through 2003
- References to supporting standards from AASHTO, ASTM, AWS, and others
- Applicable to rehabilitation, legacy design validation, and maintenance planning for non-LRFD bridges
Who It’s For:
A critical reference for bridge engineers, transportation officials, and contractors working with legacy structures or evaluating designs developed before the transition to LRFD.
HB-17-2002
Achieving Your Dreams
- Identify your comfort zone and how it’s limiting your potential.
- Set clear, realistic, and measurable goals using the SMART method.
- Build lasting habits and self-discipline that support your growth.
- Replace fear and negativity with courage and constructive thinking.
- Stay motivated during setbacks and turn obstacles into opportunities.
Achieving Your Dreams
- Identify your comfort zone and how it’s limiting your potential.
- Set clear, realistic, and measurable goals using the SMART method.
- Build lasting habits and self-discipline that support your growth.
- Replace fear and negativity with courage and constructive thinking.
- Stay motivated during setbacks and turn obstacles into opportunities.
Ackley and Ladwig’s Nursing Diagnosis Handbook: An Evidence-Based Guide to Planning Care (13th Edition)
Ackley and Ladwig’s Nursing Diagnosis Handbook (13th Edition) is a comprehensive guide for creating evidence-based, individualized care plans. It provides up-to-date nursing diagnoses, suggested interventions, and rationales that support sound clinical decision-making.
This edition features the latest NANDA-I diagnoses, outcome indicators, and NIC/NOC interventions, along with step-by-step instructions for applying them in practice. Each diagnosis includes detailed assessment data, goals, and evidence summaries that connect nursing practice to current research.
Designed for nursing students and practicing clinicians, the handbook emphasizes patient safety, interprofessional collaboration, and patient-centered care, making it a key resource for planning and documenting effective nursing care.
Ackley and Ladwig’s Nursing Diagnosis Handbook: An Evidence-Based Guide to Planning Care (13th Edition)
Ackley and Ladwig’s Nursing Diagnosis Handbook (13th Edition) is a comprehensive guide for creating evidence-based, individualized care plans. It provides up-to-date nursing diagnoses, suggested interventions, and rationales that support sound clinical decision-making.
This edition features the latest NANDA-I diagnoses, outcome indicators, and NIC/NOC interventions, along with step-by-step instructions for applying them in practice. Each diagnosis includes detailed assessment data, goals, and evidence summaries that connect nursing practice to current research.
Designed for nursing students and practicing clinicians, the handbook emphasizes patient safety, interprofessional collaboration, and patient-centered care, making it a key resource for planning and documenting effective nursing care.
Amazon Affiliate Pro
- Register, get approved, and comply with Amazon’s guidelines.
- Set up a niche website that attracts and retains targeted visitors.
- Use product reviews, banners, and dynamic content to drive sales.
- Increase your commission rate with smart product selections.
- Promote effectively using blogging, SEO, and social channels.
Amazon Affiliate Pro
- Register, get approved, and comply with Amazon’s guidelines.
- Set up a niche website that attracts and retains targeted visitors.
- Use product reviews, banners, and dynamic content to drive sales.
- Increase your commission rate with smart product selections.
- Promote effectively using blogging, SEO, and social channels.
ANSI Z535.4-2011 (R2017): Product Safety Signs and Labels
ANSI Z535.4-2011 (R2017): Product Safety Signs and Labels provides standardized guidance for the design and application of product safety signs and labels. This reaffirmed edition helps manufacturers effectively communicate hazard information to reduce risk and improve safety across a wide range of industrial and consumer products.
Highlights:
- Defines use of standardized signal words: DANGER, WARNING, CAUTION, and NOTICE
- Establishes hazard classification systems and formatting conventions
- Specifies layout, safety colors, symbols, and typography for clear communication
- Offers guidance on incorporating safety symbols for universal understanding
- Sets durability requirements for labels exposed to harsh environments
- Recommends best practices for label placement and visibility
Who It’s For:
A vital reference for engineers, product designers, compliance managers, and safety professionals responsible for labeling products in accordance with ANSI safety communication standards.
ANSI-Z535.4-2011-R2017
ANSI Z535.4-2011 (R2017): Product Safety Signs and Labels
ANSI Z535.4-2011 (R2017): Product Safety Signs and Labels provides standardized guidance for the design and application of product safety signs and labels. This reaffirmed edition helps manufacturers effectively communicate hazard information to reduce risk and improve safety across a wide range of industrial and consumer products.
Highlights:
- Defines use of standardized signal words: DANGER, WARNING, CAUTION, and NOTICE
- Establishes hazard classification systems and formatting conventions
- Specifies layout, safety colors, symbols, and typography for clear communication
- Offers guidance on incorporating safety symbols for universal understanding
- Sets durability requirements for labels exposed to harsh environments
- Recommends best practices for label placement and visibility
Who It’s For:
A vital reference for engineers, product designers, compliance managers, and safety professionals responsible for labeling products in accordance with ANSI safety communication standards.
ANSI-Z535.4-2011-R2017
ANSI/ASHRAE 62.1-2019: Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE Standard 62.1-2019: Ventilation for Acceptable Indoor Air Quality establishes minimum requirements for ventilation system design, installation, and maintenance in commercial and institutional buildings. This standard is a foundational reference for achieving acceptable indoor air quality (IAQ) and reducing health risks associated with poor ventilation.
Highlights:
- Updated Ventilation Rate Procedure with enhanced zone-level calculation methods
- Revised Natural Ventilation Procedure, including outdoor air quality and mechanical integration
- Prohibits use of ozone-generating air-cleaning devices
- Requires humidity control using dew point rather than relative humidity
- Separates patient care areas now governed under ASHRAE/ASHE Standard 170
- Clarifies definitions for spaces, ventilation zones, and contaminant sources
- Outlines requirements for design documentation, commissioning, and IAQ performance testing
- Includes appendices with ventilation rate rationale, IAQ procedures, and engineering tools
Who It’s For:
A critical reference for mechanical engineers, HVAC designers, facility managers, and code officials involved in ensuring compliant ventilation design and indoor air quality performance.
ASHRAE-62.1-2019
ANSI/ASHRAE 62.1-2019: Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE Standard 62.1-2019: Ventilation for Acceptable Indoor Air Quality establishes minimum requirements for ventilation system design, installation, and maintenance in commercial and institutional buildings. This standard is a foundational reference for achieving acceptable indoor air quality (IAQ) and reducing health risks associated with poor ventilation.
Highlights:
- Updated Ventilation Rate Procedure with enhanced zone-level calculation methods
- Revised Natural Ventilation Procedure, including outdoor air quality and mechanical integration
- Prohibits use of ozone-generating air-cleaning devices
- Requires humidity control using dew point rather than relative humidity
- Separates patient care areas now governed under ASHRAE/ASHE Standard 170
- Clarifies definitions for spaces, ventilation zones, and contaminant sources
- Outlines requirements for design documentation, commissioning, and IAQ performance testing
- Includes appendices with ventilation rate rationale, IAQ procedures, and engineering tools
Who It’s For:
A critical reference for mechanical engineers, HVAC designers, facility managers, and code officials involved in ensuring compliant ventilation design and indoor air quality performance.
ASHRAE-62.1-2019